Permanent Magnet Product
Ferrite
Sintering Magnet
Rubber Magnet
Injection
Molded Magnet
Nd-Fe-B Compression
Molded Magnet
Nd-Fe-B
Sintering Magnet
SmCo Sintering Magnet
Alnico Cast Magnet
Fe-Cr-Co Magnet
-
Ferrite Sintering Magnet
Specialty
Low price, Excellent temperature resistance, no rust，Good oil resistance and anti – drug resistance，So it’s widely used.It is widely used in many fields, such as daily groceries, sensors and on-board motors.But because of the fissility, need to pay attention to the shape of the products.Good price,Excellent tmperature resistance,No rust and Excellent oil resistance and Undrug resistanceSo it’s widely used.It is widely used in many fields, such as daily groceries, sensors and on-board motors.
-
Rubber Magnet
Specialty
As cheap as ferrite magnets.It can be curved into a ring, easy to cut by scissors, and can be highly processed.
It’s magnetism is not very strong，But due to its machinability，It is widely used in motor or pattern stamping products.
Because it is poor resistant to oil and drugs， need to pay attention to the environmen. -
Injection Molded Magnet
Specialty
Because it’s injection molding，can be made into complex shape magnets.Because can choose multiple magnetic materials，So it can meet the needs of various kinds magnetic properties.Not easy to broken，can be made into unbreakable small or embedded forming，Therefore, it is widely used for high – precision products including precision parts and high sensitivity sensors.But because of the water absorption，must pay attention to the selection and use of paper clips
-
Nd-Fe-B Compression Molded Magnet
Specialty
It is the strongest magnet in each isotropic magnet.Use the resin hardening in production，no sintering process，so there is no fear of sinter deformation，Therefore, the gap in the installation can be designed very small.With good magnetism，It is widely used in stepping motor and so on.Although it has the rust prevention，But it is still easy to rust.In addition, the heat resistance is poor， have to pay attention to the environment.
-
Nd-Fe-B Sintering Magnet
Specialty
It is the magnet with the highest magnetism.Although there are still problems to be solved in the heat resistance，But it is being improved，It has been used in the engine of the HV car.Take advantage of its high magnetic properties,It also plays a role in the small and lightweight aspects of existing products.It is widely used in automobile parts and motors、tone arm and other fields.Although it has the rust prevention，But it is still easy to rust.In addition, the heat resistance is poor， have to pay attention to the environment.
-
SmCo Sintering Magnet
Specialty
It is the magnet with the second highest magnetism than Nd-Fe-B Sintering Magnet.With excellent thermal environment characteristics, no rust, stable temperature coefficient,，
Therefore, it is widely used in automobile parts and sensors.
Due to a slight vulnerability, it is necessary to pay attention when used in an environment with external pressure.
Alnico Cast Magnet
Specialty
The most stable magnet in a hot environment.Since its foundry molding has great strength does not broken
Therefore, it is widely used in sensors under severe thermal environment and tools to withstand great external pressure.
The magnetism is small and easy to reduce it，so the flat shape is not suitable.
In addition，the magnetism can be reduced by the influence of external magnetic field in open loop，therefore, it is recommended to use in closed loop circuit.
Fe-Cr-Co Magnet
Specialty
The magnetic flux density of Fe-Cr-Co Magnet is comparable to Nd-Fe-B in anisotropy.It is widely used in servo motors, sensors and measuring instruments due to its excellent thermal environment.Since the high strength and no fracture，Can be drilled easily by screw，therefore, it is widely used for open and closed inspection of doors and Windows.The magnetism and the endurance is poor.，So if use it in an inverse magnetic environment suah as motors and so on It is recommended to use in closed loop circuit.
Soft magnetic materials&transformer products
Mn-Zn soft
magnetic ferrite
Nickel zinc soft ferrite
EMI countermeasures
use ferrite core
Amorphous soft
magnetic material/
Nanocrystalline soft
magnetic material
Metal series
powder core
Transformer
Filter, inductance,
choke coil
-
Mn-Zn soft magnetic ferrite
Specialty
Suitable for high frequency fields of 100KHz～1MHz
With low core loss properties，can have good magnetic flux performance even in the field of 120 ℃ .
Compared with metal soft magnetic,it is low price and has good machining performance
Because it is possible to be any complex shapes，and the resistance is large，
it is widely used in the field of transformers and choke coils area -
Nickel zinc soft ferrite
Specialty
Suitable for wide frequency fields of 100KHz～200MHz
It has higher magnetic flux performance than the permeability，
It is widely used in high voltage transformers and DC/DC converters. -
EMI countermeasures use ferrite core
Specialty
Because it applies to high frequency domain，Suitable for 10MHz ~ 30MHz terminal noise and nonradiative noise in 30MHz～500MHz
Due to high impedance, no special insulation treatment, good cost performance
Because of the fragile，shock resistant measures are required when used in an external environment -
Amorphous soft magnetic material/Nanocrystalline soft magnetic material
Specialty
For low frequency range of 50Hz ~ 1kHz，can be used to miniaturize products in place of conventional materials
fe-base amorphous has high saturation and magnetic flux density，Co-base amorphous has the characteristic of low loss.Fe-based nanocrystalline has these two characteristics，widely used in many fields.There are two types of the core as ribbon type and dust type .please use them as needed. -
Metal series powder core
Specialty
Suitable for frequency fields of 50Hz～100kHz.
With good dc superposition characteristics, high magnetic impedance and low loss characteristics.
Generally used in power filtering, switching power supply high frequency filter coil.
There are various standard fe-si-al alloy powder core,Si-fe alloy core and other magnetic core，
Can propose magnetic powder cores that needed -
Transformer
Specialty
With conventional transformers,EI・EE・EC（EER）・EP・RM・PQ series，
Patch type transformer EP・EFD＆EPC series，
The background lamp drives the transformer UIEFD＆EPC series and so on .
There are all kinds of specifications except the catalogue
Welcome to consult -
Filter, inductance, choke coil
Specialty
Equipped filter UU・UF・EE・ET・ring series
Inductance ・ choke coilDC・BC・SNDR・ring series and so on.
There are all kinds of specifications except the catalogue
Welcome to consult